Skip to main content

Tag

Troubleshooting

1 article covering Troubleshooting. Every guide is written by the engineers who run the process, not by a marketing team.

Fractured die tooling component under inspection
Troubleshooting6 min read

Die Tooling Failure Analysis: Why Dies Chip, Crack and Wear Out

Most die failures leave evidence at the fracture surface. This troubleshooting guide maps the four common failure modes — chipping, cracking, premature wear and EDM cracking — to their real root causes, and gives a five-point checklist that prevents the majority of them.

Aug 25, 2026Read article →

Related tags

#Chipping#Die Failure#Die Maintenance#Tool Steel#Wire EDM Cracking#1.2379#440C equivalent#Anvil#Anvil Cylinder#Cobalt HSS#Cold-Work Tool Steel#Comparison
← All technical resources